• Alternator bearings
• Hub units
• Air-condition bearings
• Clutch release bearings
• King pin thrust bearing
• Taper roller bearings
• Tensioner bearings
• Water pump bearings
• Wheel bearings
• Agricultural bearings
• Cylindrical roller Bearings
• Deep groove ball bearings
• Pillow blocks
• Spherical plain bearings
• Self-aligning ball bearings
• Spherical roller bearings
• Thrust ball bearings
• Linear bearings
• Double taper roller bearings
• One way bearings
• Stainless steel bearings
• Dental bearings
• 

Recommend products

SPIN bearing are dedicated to providing high quality dental bearings, dental ball bearing,
dental handpiece bearing for handpiece repair shops and manufacturers with very competitive price.
Dental ball bearings for dental handpieces come in many shapes and sizes. Many low-speed Dental Handpiece bearings
only require standard type cages. We recommend Stainless Steel and at least P6 precision for these
applications.
High Precision Dental Bearings usually have a synthetic cage. High-speed handpiece
bearings are generally at least Abec 7 precision, and often have modified internal design.

Features :

Material:
Rings: AISI440C
Balls:Si3N4 Ceramic balls or stainless steel balls
Ceramic balls: (20% harder than conventional bearings with steel balls, 50% the weight of the steel equivalent,
frictional wear between the bearings and bearing retainers is significantly reduced, Noise is very low.)
Retainers:
TorlonPolyimidePhenolic

Applications :

Our dental bearings can be used at the following brands handpieces:

Abu-Handpieces Adec Alpha Air Banner Beaver Bien Air Bordon Bravo Bedetrice Buffalo DME Dabi-Atlante Dynadent Elco - Austria Falcon

Faro Futura Gamborini Impact-Air KMD Kavo Kool Torque Lares MTC MTI Micro Mega Midwest Morita Muss

NSK Royal - Handpieces SS White Shofu Siemens Star Starflite TKD Torx W and H Yoshida

Technology

1,It is best that the interference between bearing bore and turbine shaft is under 0.5um¡«1.5um.
When put burbine shaft into bearing bore,the pressure should be force on inner ring
to avoide damage rollway nest and balls.

2,After interference tubine shaft into bearing,they should be clear and instil professional lubricant.(must not use ethanol
or acetone to clear.

3,High Speed Air Turbine H.P.should be sprayed some lubricant into air inlet before used,
especially, after high steam disinfected, so that bearing could be used longer time.

4,To keep operating stability£¬prestretching stress of spring should be under1.5+-0.5N.

Contact Us

NINGBO RED PRINT MACHINERY CO.,LTD
ADD:No.137, Bei Er Huan West Road. Cixi, Ningbo, China
Postcode:315300
TeL:+86-574-63814517
Fax:+86-574-63814860
Contac Person:SIMON QIU
E-Mail:sales@ourbearings.com
WebSite:http://www.ourbearings.com